House Construction Civil Design Tool

Advanced House Construction Civil Design Tool

Foundation & Structural Design (Illustrative)

Basic recommendations based on inputs. Consult a structural engineer for detailed design.

Building Type: Ground Floor Only (G+0) Ground + 1 Floor (G+1) Ground + 2 Floors (G+2) Ground + 3 Floors (G+3)

Soil Bearing Capacity (kN/m²):

Approx. Foundation Area (sqft):

Design Recommendations:

Material Quantity Calculator

Concrete Volume (m³):

Concrete Mix (e.g., 1:2:4): M25 (1:1.5:3) M20 (1:2:4) M15 (1:3:6) M10 (1:4:8)

Brickwork Area (sqft):

Wall Thickness (inch): 4.5 inches 9 inches

Plastering Area (sqft):

Plaster Thickness (mm):

Steel % in RCC (Approx):

Apply % to Concrete Volume for approx. steel weight.

Estimated Material Quantities:

Cost Estimator

Enter total built-up area and prevailing market rates.

Total Built-up Area (sqft):

Avg. Construction Cost per sqft (₹): This is a common thumb-rule method.

---

OR Enter detailed rates (Overrides thumb rule if values entered):

Cement Rate per Bag (₹):

Sand Rate per cft (₹):

Aggregate Rate per cft (₹):

Steel Rate per Kg (₹):

Brick Rate per 1000 Nos (₹):

Avg. Labour Cost per sqft (₹):

City/State (for reference): Rates vary significantly by location. API integration (e.g., data.gov.in) could fetch indicative rates but requires setup.

Estimated Construction Cost:

Room Layout & Area Planner

Enter dimensions to calculate carpet area and approximate built-up area.

Room Name:

Length (ft):

Width (ft):

---

External Wall Thickness (inch):

Balcony/Common Area Approx. (% of Carpet):

Calculated Areas:

Civil Engineering Unit Converter

Value:

From: Meter (m) Feet (ft) Inch (in) Centimeter (cm) Square Meter (m²) Square Feet (ft²) Acre Cubic Meter (m³) Cubic Feet (ft³) Litre (L) Kilogram (kg) Tonne (t) Pound (lbs) Kilopascal (kPa) PSI (lb/in²) N/mm² (MPa)

To:

Conversion Result:

Report Summary & Export

Review the consolidated results below and click Export to PDF.

Construction Estimate Summary

Report Generated On:

---

Foundation & Structure Summary:

Inputs and results will appear here after calculation.

---

Material Quantity Summary:

Inputs and results will appear here after calculation.

---

Cost Estimation Summary:

Inputs and results will appear here after calculation.

---

Area Summary:

Inputs and results will appear here after calculation.

---

Disclaimer: These calculations are estimates based on provided inputs and simplified formulas. Always consult with qualified civil engineers and architects for accurate design and detailed costing.